– Policy-Based Routing configuration is removed after the switch reboot.
– The switch reboots itself after executing the OpenFlow commands.
– The traffic loss during the stack failover from the active to the standby switch.
– Dante ProAV endpoints are not working after the M4300-96X switch is rebooted.
– When PTP TC is enabled, Dante ProAV endpoints are not time-synchronized.
– Green Ethernet (EEE) feature doesn’t work on the switch.
– A new GUI page is added in 12.0.11.x release under Routing > Multicast > Mroute Static-Multicast Configuration. This page doesn’t show up when the switch firmware is upgraded from 12.0.9.x to 12.0.11.x. Clear the browser cache to view this newly added page.
About Switch Firmware:
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.